← Return to FPV Airframe
YH-5016
YH-5016 is an FPV drone frame, made of 3K Carbon Fiber T300, wheelbase 1160 mm, arm tube diameter φ30 mm, specification 22 inch.

Differences between similar models
View the key parameters of similar products side by side; click on the model to view corresponding details.
| Model | Specifications | Wheelbase | Frame weight | Top plate thickness | Arm thickness | Arm tube diameter |
|---|---|---|---|---|---|---|
| YH-5009 | 5 inch | 277 mm | 120 g | 2 mm | 6 mm | — |
| YH-5010 | 7 inch | 311 mm | 178.6 g | 2 mm | 6 mm | — |
| YH-5011 | 10 inch | 396 mm | 248 g | 2 mm | 7 mm | — |
| YH-5012 | 10 inch | 427 mm | 228 g | 2.5 mm | 7 mm | — |
| YH-5013 | 13 inch | 600 mm | 738 g | 2 mm | 10 mm | — |
| YH-5014 | 15 inch | 647 mm | 768 g | 2 mm | 10 mm | — |
| YH-5015 | 18 inch | 840 mm | 1150 g | 2 mm | 13 mm | — |
| YH-5016 | 22 inch | 1160 mm | — | 3 mm | — | φ30 mm |
Detailed parameters
| parameters | numerical value |
|---|---|
| Wheelbase | 1160 mm |
| Arm tube diameter | φ30 mm |
| Specifications | 22 inch |
| Material | 3K Carbon Fiber T300 |
| Top plate thickness | 3 mm |
| Airframe material | 3K carbon fiber T300 |
| Series specifications | Mark 22; 22 inches |
| Flight control/ESC mounting holes | M4 × 30 × 30 mm |
| Motor mounting hole | M2 × 19 × 19 mm |
| Camera mounting hole | M2 × 20 × 20 / 30.5 × 30.5 mm |
| Image transmission mounting holes | 30 mm |
Parameter verification tip: The three fields at the end of the original page are misplaced: the thickness of the bottom plate, the height of the internal space, the adapted propeller and the weight cannot be confirmed and will not be displayed for the time being.
